The RangeVue™️15 is a non-contact, radar water-level sensor used for monitoring the water level of rivers, lakes, and reservoirs. Using 80 GHz radar technology, it directly measures the distance between the sensor face and the water surface. This distance can be used to determine water level or stage. The sensor is ideal for areas where submersible sensors can be damaged due to corrosion, contamination, flood-related debris, or lightning.
Measurement Description | Distance |
Output Options | SDI-12 |
Measurement Range | 15 m (49.2 ft) |
Accuracy | ±2 mm (±0.0065 ft) |
Resolution | 1 mm (0.0033 ft) |
Radar Frequency | W-band (80 GHz) |
Beam Angle | 8° |
Input Voltage | 8 to 30 Vdc |
Current Drain | 10 mA (at 12 Vdc) |
Operating Temperature Range | -40° to +80°C |
Mechanical Rating | IP66/68 IEC 60529, Type 4X/6P UL 50 |
Material | PVDF, FKM |
Cable Termination | 4-Pin A-Coded M12 Connector |
Threads | 1 NPT, 1.5 NPT |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
Aspen 10 | ||
CR1000 (retired) | ||
CR1000X | ||
CR200X (retired) | ||
CR295X (retired) | ||
CR300 | ||
CR3000 (retired) | ||
CR310 | ||
CR350 | ||
CR6 | ||
CR800 (retired) | ||
CR850 (retired) |
Product | Compatible | Note |
---|---|---|
AL200 |
Product | Compatible | Note |
---|---|---|
Granite 6 |
The RangeVue 15 interfaces using the SDI-12 communications protocol, and it is compatible with any SDI-12-compliant data recorder, including Campbell Scientific data loggers.
Two programs use the C1! SDI-12 instruction to measure the RangeVue-series sensors. One program is for the CR350 data logger and one program is for the CR1000X data logger. The program sets the Stage_Reference value to 15.25. This value needs to be changed to your stage reference value. Also, the SDI-12 address is entered as a constant with a value of 0. If the SDI-12 address of the sensor has been changed from the default value, this value needs to be changed to match the sensor address. The program sets the Sensor_Units variable to feet (option 1), which needs to be changed if using other units. See comments in the program for details.