This product is no longer available. Some accessories, replacement parts, or services may still be available.
Imagen no disponible
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The RF430 spread spectrum radio includes a USB port to make it easier to connect to newer computers that do not have RS-232 ports. This 100 mW spread spectrum radio/modem operates in the 910 to 918 MHz frequency range, which is used in the US and Canada. The RF430 can transmit data to another RF430 radio, an RF401 radio, or a CR206(X) datalogger.
The RF430 supports point-to-point and point-to-multipoint communications. Although it typically serves as a base station modem/radio, the RF430 can connect to the datalogger’s RS-232 port to serve as a field modem (requires a null modem cable and a field power cable).
Read MoreBenefits and Features
- USB port for connecting to a computer; RS-232 port for connecting to a data logger
- Rugged, low-cost transceivers
- Transmits up to one mile with omnidirectional antenna; up to 10 miles with higher gain directional antennas at ideal conditions
- Individual FCC license not required
- Optional extended temperature testing
- Settings stored in non-volatile memory
- Designed for use in PakBus networks
- Frequency-hops over 25 channels avoids interference from other spread spectrum radios
- Faster communication due to elimination of some small "link state packets"
- Ability to have stand-alone RF router/repeaters (up to 8 repeaters)
- Greater immunity to interference and RF collisions by using RF retries
- Reduced power consumption by the data logger, as the radios perform "packet address filtering"
- Built-in setup menus allow access to advanced functionality
Similar Products
Detailed Description
The RF430 reduces susceptibility to RF interference from other spread spectrum devices by providing user-selectable frequency hopping patterns. Spread spectrum radios spread the normally narrowband information signal over a relatively wide band of frequencies. This process allows communications to be more immune to noise and interference from RF sources such as pagers and cellular phones.
RF430 and RF401 Differences
The RF430 radio is functionally the same as the RF401. The difference between the two is that the RF430 has USB and RS-232 ports, while the RF401 has RS-232 and CS I/O ports.
Specifications
| Operating Frequency | 910 to 918 MHz |
| Type | Frequency Hopping Spread Spectrum (FHSS) Transceiver |
| USB Baud Rate |
38.4k, 19.2k, 9600, 4800, or 1200 bps If an RF430 radio has an operating system prior to OS2, its USB port will only communicate at 38.4 kbps. Therefore, the operating system of an RF430 radio may need to be updated to a newer version if the network will contain data loggers that do not support 38.4 kbps (e.g., CR200(X), CR510, CR10X). |
| RS-232 Data Rate | 38.4k, 19.2k, 9600, 4800, or 1200 bps |
| Channel Capacity | 65,000 Network Identifiers share 25 hop channels. |
| Frequency Hopping Patterns | Six different selectable patterns |
| Receiver Sensitivity | -110 dBm at 10-4 bit error rate (Campbell Scientific protocols will issue retries wherever a bit error occurs.) |
| Interference Rejection | 70 dB at pager and cellular phone frequencies |
| Transmitter Power Output | 100 mW (nominal) |
| Antenna Connector | Reverse polarity SMA |
| FCC ID | OUR9XTREAM |
| Power | 9 to 16 Vdc |
| LEDs | Power on, TX, RX, diagnostics |
| RS-232 Connector | 9-pin “D” female (4 wire: Tx, Rx, CTS, GND) |
| Power Connector | Barrel plug, center positive 12 V (used to connect the 14291 Field Power Cable) |
| Standard Operating Temperature Range | -25° to +50°C |
| Extended Operating Temperature Range |
-55° to +85°C The push button that allows you to check/edit programmable settings while the radio is connected to a computer may not operate at temperatures colder than -25°C. |
| Dimensions | 11.4 x 7.0 x 2.9 cm (4.9 x 2.8 x 1.2 in.) |
| Weight | 227 g (8 oz) |
Average Current Drain |
|
| Standby | < 1 mA (power-saving options used) |
| Receiving | 26 mA |
| Transmitting | 78 mA |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR1000X | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR300 | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | Although compatible, RF430 radios do not support the CR9000(X)'s fastest communication rates, and are therefore not practical for many of their applications. | |
| CR9000X (retired) | Although compatible, RF430 radios do not support the CR9000(X)'s fastest communication rates, and are therefore not practical for many of their applications. |
Additional Compatibility Information
Communications
Other Spread-Spectrum Radios
The RF430 radios can be used in networks containing RF401 and RF400 radios. When RF430 radios are used in networks containing RF400 radios, the Protocol must be set to Transparent. Also, if RF400 and RF430 radios will be in the same RF proximity, do not use 28, 44, 52, 56, or 60 for the RF400 Net Address. RF400 radios with Net Addresses of 28, 44, 52, and 56 interfere with RF430 radios with Net Addresses of 0, 1, 2, and 3, respectively. The RF400 Net Address of 60 interferes with all RF430 Net Addresses.
Campbell Scientific does not recommend using the RF430 in networks containing FGR-115 or RF450 radios.
Transparent and PakBus Protocols
Do not mix RF430 radios set to the Transparent protocol with RF430 or RF401 radios set to either of the PakBus protocols, since this will produce RF traffic without any RF communications. However radios with the PakBus Aware and PakBus Node settings can coexist in the same network (i.e., some radios set to PakBus Aware and some radios set to PakBus Node).
Data Logger Considerations
If an RF430 radio has an operating system prior to OS2, its USB port will only communicate at 38.4 kbps. Therefore, the operating system of an RF430 radio may need to be updated to a newer version if the network will contain data loggers that do not support 38.4 kbps (e.g., CR200(X), CR510, CR10X).
Documents
Downloads
RF430 Series OS v.02 (702 KB) 30-08-2011
Current RF430, RF431, RF432 firmware. Requires the Device Configuration Utility.
RF430 USB Drivers v.2.08.28 (1.64 MB) 05-03-2013
RF430 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows Vista and Windows XP.
Note: Drivers should be loaded before plugging the RF430 into the computer.
Frequently Asked Questions
Number of FAQs related to RF430: 1
-
There is a good chance that they would. However, the RF401A radios have been designed to work with Campbell Scientific data loggers. There are more generic spread-spectrum radios (off the shelf) that are designed to work in this type of configuration.