Services Available | |
---|---|
Repair | No |
Free Support | Yes |
The CC5MPXWD is similar to the CC5MPX, except it includes an internal defroster that prevents and removes light frost and icing from the camera's window. This high-resolution digital camera produces JPG images with a resolution of up to 5 megapixels, and shoots videos with a resolution of up to 720P. It has an integrated environmentally sealed enclosure that protects the camera from moisture and high humidity. An SD memory card for image storage is available as an option.
Read MoreThe CC5MPXWD can function as a stand-alone camera or can be connected to a Campbell Scientific datalogger or another PakBus device. It has several options for image acquisition and storage. You can take still images or videos based on an internal timer, motion detection, or a trigger from an external PakBus device (such as a datalogger). The images or videos can then be stored on an SD card, saved in a datalogger’s memory, sent to a PC via email, or transmitted to an FTP server.
The CC5MPXWD's defroster consists of an aluminum ring with a resistive type heating element. Springs are used to press the defroster against the camera's window.
The defroster turns on when the internal temperature is below a specified value and not in the low powered state. You can also specify the number of minutes before a self-timed schedule that the defroster will turn on.
With extreme icing or riming conditions and low temperatures, the window defroster may not be able to clear the window due to the power constraints of the defroster.
Heating Element Resistance | 18 Ω |
Operating Power |
9 to 16 Vdc Operating at voltages greater than 16 Vdc can damage the camera. |
Operating Temperature Range | -40° to +60°C |
Clock Accuracy | ±2 minutes per year (-40° to +60°C) |
Photo or Video Capture Triggers | Two independent self timers, external trigger, motion detection, web page control |
Programmable Still Image Resolutions |
|
Video |
Capable of up to 720P for the following:
|
Communication Interfaces | RS-232 port; RS-485 port; Ethernet 10/100 |
Communications Protocols | PakBus, FTP, email, web page interface via web browser |
Maximum Baud Rate | 115.2 kbps (for RS-232 and RS-485 only) |
Window Defroster | Yes |
Wi-Fi Capable | No |
Low-Light Capability | Not designed for low-light conditions. |
NDVI Capability | No |
Diameter | 9.3 cm (3.7 in.) |
Length | 22 cm (8.7 in.) |
Weight | 1.06 kg (2.34 lb) |
Communication Switched Power Output |
|
Maximum Output Current | 750 mA |
Current Drain (camera only) |
|
Maximum | 250 mA (at 12 Vdc) |
Quiescent | ≤1 mA (off power mode) |
Current Drain (with defroster on) |
|
Typical | 1.0 A (@ 12 Vdc) |
Maximum | 1.2 A (@ 16 Vdc) |
Lens |
|
Mount | C-type |
IRIS | DC compatible |
Standard Lens | 4 to 12 mm, 27° to 80° FOV |
External Input Signal |
|
Logic Low Level | 0.65 Vdc (-20 Vdc absolute minimum) |
Logic High Level | > 2.0 Vdc (+20 Vdc absolute maximum) |
Minimum Pulse Width | 10 ms |
Memory Card Interface |
|
Type | Secure Digital (SD) |
File System | FAT32 |
File Type | JPEG (image), AVI (video) |
Size | 16 GB or less |
Photo Capture Time |
|
-NOTE- | Time is from wake-up to start of capture. |
Fully On | < 1 s (5 MP images take longer.) |
Partially On | 10 s |
Deep Sleep | 15 s |
Off State | 90 s |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR1000 (retired) | ||
CR1000X | ||
CR10X (retired) | The CR10X must be the -2M version and must use the PakBus operating system. | |
CR200X (retired) | ||
CR206X (retired) | ||
CR211X (retired) | ||
CR216X (retired) | ||
CR23X (retired) | The CR23X must be the -2M version and must use the PakBus operating system. | |
CR295X (retired) | ||
CR300 | ||
CR3000 (retired) | ||
CR310 | ||
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | The CR510 must be the -2M version and must use the PakBus operating system. | |
CR800 (retired) | ||
CR850 (retired) | ||
CR9000 (retired) | ||
CR9000X (retired) |
The 18549 Camera Mounting Kit is used to mount the CC5MPXWD camera to a CM202, CM204, or CM206 crossarm. The crossarm then attaches to a tripod, tower, or user-supplied pole (1.0-in. to 2.1-in. outer diameter). The bracket’s design facilitates the aiming of the camera.
The CC5MPXWD is compatible with any PakBus data logger that has 2 MB or greater of on-board memory. The data logger must have a current operating system.
The CC5MPXCBL1 Power and I/O Cable connects the camera to:
An Ethernet cable is required to configure the camera. Typically, the CC5MPXCBL2 Environmental Cable is used. The Ethernet cable connects the camera to a network router, cellular modem, or laptop. With this connection, the user can access a web interface that:
Current CC5MPX Camera Operating System.
Note: Do not extract the firmware update file “CC5MPX_FW_1_25_1.tar.gz”.This compressed file gets sent to the CC5MPX as is.
View Update History