Data Cables / SC105
SC105 CS I/O to 9-Pin RS-232 DCE Synchronous Interface
Communication Support
weather aplicaciones soportadas water aplicaciones soportadas energy aplicaciones soportadas gas flux and turbulence aplicaciones soportadas infrastructure aplicaciones soportadas soil aplicaciones soportadas

Overview

The SC105 is a CS I/O to RS-232 adapter used to connect a Campbell Scientific datalogger to an RS-232 DCE device. Common DCE devices used with the SC105 include cellular modems, radios, and smart serial sensors. The SC105 is compatible with any datalogger that has a CS I/O port. Multiple SC105 interfaces can be connected to a single datalogger CS I/O port.

 

Read More

Benefits and Features

  • Supports communication between a data logger and an RS-232 DCE device
  • Communicates at baud rates up to 115.2 kbps
  • Provides internal buffering capability to ensure no data is lost during transmission
  • Data logger can operate at a different baud rate than the DCE device
  • No power source needed—powered by the datalogger and computer
  • Compatible with most Campbell Scientific data loggers
  • Helps protect components from electrical damage
  • Ships with cables needed for most uses

Images

Detailed Description

The SC105 provides internal buffering that temporarily stores data. This buffering allows the data logger and DCE device to operate at different baud rates by storing the data received from the faster device until the slower device is ready to receive it. Internal buffering also ensures that no data is lost during transmission.

Specifications

Baud Rates Supported 1200, 9600, 19200, 38400, 57600, 115200 bps
RS-232 Parity Supported Even, odd, none
RS-232 Data Bits Supported 7, 8
CS I/O Port Modes CSDC, SDC, ME, Addressed Print Device for P96 output
Power Requirements Data logger’s 5 V supply
Current Drain
  • Up to 8 mA of additional current may be used by the DCE device connected to the SC105.
  • 0.16 mA (standby)
  • 1 to 4 mA (communicating)
Operating Temperature Range
  • -25° to +50ºC (standard)
  • -55° to +85°C (extended)
Operating Relative Humidity up to 95% (non-condensing)
Dimensions 2.3 x 4.3 x 9.2 cm (0.9 x 1.7 x 3.6 in.)
Weight 45.4 g (1.6 oz)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
21X (retired) The 21X does not support direct output to a printer; use an SC932 for this purpose.
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Additional Compatibility Information

Cable Connections and Mounts

Three cables (13657 Null Modem Cable, SC12 CS I/O Data Cable, and 10873 Serial Data Cable) are shipped with the SC105. The 13657 cable is used to program the device via a computer. The SC12 cable connects the SC105 to the data logger, and the 10873 cable connects the SC105 to the RS-232 DCE device. An SC12R-6 cable (purchased separately) may be used instead of the SC12 cable if a longer cable is required.

The 16987 mounting kit is available for attaching the SC105 to the backplate of an environmental enclosure.

Data Logger Considerations

Note: When using an SC105 with OS version 4 or newer with a mixed-array data logger, the data logger operating system should be updated to the latest released version.

Downloads

SC105 OS v.04 (573 KB) 28-08-2007

Current SC105 firmware. Requires the Device Configuration Utility and a 9-pin socket (female) to socket (female) NULL modem cable.

View Update History

Device Configuration Utility v.2.30 (46.9 MB) 02-10-2024

A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.

Supported Operating Systems:

Windows 11 or 10 (Both 32 and 64 bit)

View Update History