This product is no longer available. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The RavenXTV is a 3G cellular gateway for Verizon Wireless. The RavenXTV has an RS-232 serial interface for configuration and deployment with Campbell Scientific dataloggers and peripherals.
Internet Connectivity
The RavenXTV provides Internet connectivity to any of our dataloggers located within range of a compatible cellular network. With Internet connectivity, a datalogger can transmit data to, and be remotely administered by, Campbell Scientific software. The RavenXTV can also enable many dataloggers to communicate using other Internet protocols, such as email and web (HTTP).
Device Intelligence
The RavenXTV is powered by Sierra Wireless’s ALEOS embedded operating system. This allows the RavenXTV to provide highly reliable connectivity and remote device management independent of the device it is connected to. The embedded applications include IP serial server and client, local PPP host, dynamic DNS client, performance monitoring, IPsec VPN, and GRE tunneling.
Read MoreBenefits and Features
- Internet connectivity using high-speed 3G cellular networking
- Low power consumption without sacrificing device intelligence
- Compatible with most Campbell Scientific data loggers
- Rugged design with wide operating temperature and Class I Division 2 compliance
Images
Detailed Description
Before purchasing the RavenXTV, verify that EV-DO / CDMA coverage is available at your site(s) by contacting Verizon. Refer to the Compatibility information on the web page regarding establishing cellular service.
Specifications
| Technology | 3G EV-DO Rev. A (with fallback to CDMA 1x Rev. 0, CDMA 1xRTT, CDMA IS-95) |
| Dual Band | 800 MHz Cellular, 1900 MHz PCS |
| Transmit Frequency | 1850 to 1910 MHz and 824 to 849 MHz |
| Transmit Power |
|
| Receiver Frequency | 1930 to 1990 MHz and 869 to 894 MHz |
| CDMA Throughput | Up to 80 kbps |
| RS-232 Data Rates | 1200 bps to 115.2 kbps |
| Serial Interface | RS-232, DB9-F |
| Serial Protocols | AT Commands, PPP, SLIP, UDP/IP, TCP/IP |
| RF Antenna Connector | 50 Ω SMA |
| Input Current Range | 40 to 250 mA |
| Input Voltage Range | 6 to 28 Vdc |
| Status LEDs | Power, Network, Signal, Activity |
| Operating Temperature Range | -30° to +65°C |
| Operating Humidity | 5% to 95% RH (non-condensing) |
| Typical Current Drain |
|
| Dimensions | 10 x 7.6 x 2.5 cm (4 x 3 x 1 in.) |
| Weight | < 0.5 kg (< 1 lb) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | An SC105 or SC932A is required to connect the RavenXTV to the CS I/O port of the data logger. | |
| CR10 (retired) | An SC105 or SC932A is required to connect the RavenXTV to the CS I/O port of the data logger. | |
| CR1000 (retired) | ||
| CR10X (retired) | An SC105 or SC932A is required to connect the RavenXTV to the CS I/O port of the data logger. | |
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR300 | Use a 18663 null modem cable. | |
| CR3000 (retired) | ||
| CR310 | Use a 18663 null modem cable. | |
| CR500 (retired) | An SC105 or SC932A is required to connect the RavenXTV to the CS I/O port of the data logger. | |
| CR5000 (retired) | ||
| CR510 (retired) | An SC105 or SC932A is required to connect the RavenXTV to the CS I/O port of the data logger. | |
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | Although the CR9000 is compatible, the RavenXTV does not support its fastest communication rates, and therefore may not be practical for many CR9000 applications. | |
| CR9000X (retired) | Although the CR9000X is compatible, the RavenXTV does not support its fastest communication rates, and therefore may not be practical for many CR9000X applications. |
Additional Compatibility Information
Establishing Cellular Service
Call Verizon at 1-888-384-1775 and ask to speak to an M2M (machine-to-machine) account sales expert for the purpose of setting up either a static or dynamic IP account. A static IP account eliminates the need for a third-party Dynamic Domain Name System (DDNS), such as IP manager. The DDNS translates the domain name to a dynamic IP address so that the modem can be contacted as if it had a static IP address.
When setting up the account, you will need the ESN number, which is listed on the modem’s label. You will also need to request the unrestricted IP. Verizon’s Broadband Plan is also recommended.
Configuring the Modem
The RavenXTV is configured using Campbell Scientific’s Device Configuration Utility. Device Configuration Utility simplifies configuration of the modem parameters.
Alternatively, a RavenXTV that has been successfully connected to the Internet can be configured using a web browser. Using your web browser, navigate to http://your.devices.address:9191.
Data Logger Considerations
The modem connects to the data logger's RS-232 port via a 9-pin male-to-male null modem cable; Campbell Scientific offers the 18663 null modem cable (see Ordering). Alternatively, the modem can be connected to the data logger's CS I/O port, but an SC105 or SC932A interface is required.
Power Considerations
A power cable included with the modem connects to the data logger’s 12 V or switched 12 V terminal. Connection to the switched 12 V terminal allows the data logger to switch power to the modem during scheduled transmission intervals, thereby conserving power. Alternatively, the modem can be powered directly from a battery or one of our charging regulators. For help with analyzing your system’s power requirements, refer to our "Power Supply Overview" or "Power Supplies" application note.
Enclosure Considerations
A desiccated, non-condensing environment is required. The 14394 Mounting Kit includes hardware for securing the RavenXTV to an enclosure backplate (see Ordering Info).
Documents
Videos & Tutorials
Downloads
Device Configuration Utility v.2.30 (46.9 MB) 02-10-2024
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 11 or 10 (Both 32 and 64 bit)