This product is no longer available. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
Note that AT&T is actively working on discontinuing 2G service, making the RavenXTG unusable in some areas.
The RAVENXTG does not have a direct replacement. However, the LS300G offers similar functionality with a higher power consumption.
The RavenXTG is a 2G cellular gateway for AT&T and GPRS networks. The RavenXTG has an RS-232 serial interface for configuration and deployment with Campbell Scientific dataloggers and peripherals.
Internet Connectivity
The RavenXTG provides Internet connectivity to any of our dataloggers located within range of a compatible cellular network. With Internet connectivity, a datalogger can transmit data to, and be remotely administered by, Campbell Scientific software. The RavenXTG can also enable many dataloggers to communicate using other Internet protocols, such as email and web (HTTP).
Device Intelligence
The RavenXTG is powered by Sierra Wireless’s ALEOS® embedded operating system. This allows the RavenXTG to provide highly reliable connectivity and remote device management independent of the device it is connected to. The embedded applications include IP serial server and client, local PPP host, dynamic DNS client, performance monitoring, IPsec VPN, and GRE tunneling.
Read MoreBenefits and Features
- Internet connectivity using 2G cellular networking
- Low power consumption without sacrificing device intelligence
- Compatible with most Campbell Scientific data loggers
- Rugged design with wide operating temperature and Class I Div 2 compliance
Images
Detailed Description
Before purchasing the RavenXTG, verify that your site has GPRS coverage. A coverage map is available at www.wireless.att.com/coverageviewer.
Refer to the Compatibility section for information on establishing cellular service.
Specifications
- Technology: 2G GPRS (MS-12), quad band
- Quad Bands: 850/1900 MHz; 900/1800 MHz
- Transmit Power:
1.0 W for 1900 MHz;
0.8 W for 850 MHz - GPRS Throughput: up to 70 kbps
- RS-232 Data Rates: 1200 bps to 115.2 kbps
- Serial Interface: RS-232, DB9-F
- Serial Protocols: AT Commands, PPP, SLIP, UDP, TCP
- RF Antenna Connector: 50 Ohm SMA
- Input Current Range: 40 to 250 mA
- Input Voltage Range: 6 to 28 Vdc
- Status LEDs: Power, Network, Signal, Activity
- Operating Humidity Range: 5% to 95% RH noncondensing
- Operating Temperature Range: -30° to +65°C
- Width: 7.6 cm (3 in.)
- Depth: 2.5 cm (1 in.)
- Length: 10 cm (4 in.)
- Weight: < 0.5 kg (< 1 lb)
Transmit Frequency
- 850/1900 MHz: 824 to 849 MHz and
1850 to 1910 MHz - 900/1800 MHz: 890 to 915 MHz and
1710 to 1785 MHz
Receiver Frequency
- 850/1900 MHz: 869 to 894 MHz and
1930 to 1990 MHz - 900/1800 MHz: 935 to 960 MHz and
1805 to 1880 MHz
Typical Current Drain at 12 Vdc
- Dormant (idle for 10 to 20 seconds): 50 mA
- Transmit/Receive: 120 mA
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | An SC105 or SC932A is required to connect the RavenXTG to the CS I/O port of the data logger. | |
| CR10 (retired) | An SC105 or SC932A is required to connect the RavenXTG to the CS I/O port of the data logger. | |
| CR1000 (retired) | ||
| CR10X (retired) | An SC105 or SC932A is required to connect the RavenXTG to the CS I/O port of the data logger. | |
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | An SC105 or SC932A is required to connect the RavenXTG to the CS I/O port of the data logger. | |
| CR5000 (retired) | ||
| CR510 (retired) | An SC105 or SC932A is required to connect the RavenXTG to the CS I/O port of the data logger. | |
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | Although the CR9000 and CR9000X are compatible, the RavenXTG does not support their fastest communication rates, and therefore may not be practical for many CR9000(X) applications. | |
| CR9000X (retired) | Although the CR9000 and CR9000X are compatible, the RavenXTG does not support their fastest communication rates, and therefore may not be practical for many CR9000(X) applications. |
Additional Compatibility Information
Establishing Cellular Service
Either a static IP account or a dynamic IP account needs to be established. A static IP account eliminates the need for a third party Dynamic Domain Name System (DDNS) such as IP manager. The DDNS translates the dynamic IP address to a domain name so that the RavenXTG can be contacted as if it had a static IP address.
To setup an account, call AT&T at 1-800-331-0500 and ask for an unrestricted data account for an GPRS modem. After the account has been setup, mobile termination needs to be configured onto the account to make the modem accessible through the Internet. Typically this is done by adding I2gold APN to the account. A data account with an I2gold APN will have a Static IP address.
Please note that at one time, feature code G821 was used instead of the I2gold APN. Feature code G821 has been discontinued, and all RavenXTGs need either an I2gold APN or custom APN.
AT&T can also setup a custom APN. A custom APN may offer more efficient routing and better security for large cellular phone networks. It will take four to six weeks for AT&T to develop a custom APN and cost about $250.00.
AT&T will provide a SIMM card for each modem. In some cases the SIMM card can be picked up at a local AT&T store. The SIMM card must be installed inside of the modem (see manual).
Configuring the Modem
The RavenXTG is configured using Campbell Scientific’s Device Configuration Utility. Device Configuration Utility simplifies configuration of the modem parameters.
Alternatively, a RavenXTG that has been successfully connected to the Internet can be configured using a web browser. Using your web browser, navigate to http://your.devices.address:9191.
Data Logger Considerations
The modem connects to the data logger's RS-232 port via a 9-pin male-to-male null modem cable; Campbell Scientific offers the 18663 null modem cable (see Ordering). Alternatively, the modem can be connected the the data logger's CS I/O port, but an SC105 or SC932A interface is required.
Power Considerations
A power cable included with the modem connects to the data logger’s 12 V or switched 12 V terminal. Connection to the switched 12 V terminal allows the data logger to switch power to the modem during scheduled transmission intervals, thereby conserving power. Alternatively, the modem can be powered directly from a battery or one of our charging regulators. For help with analyzing your system’s power requirements, refer to our "Power Supply Overview" or "Power Supplies" application note.
Enclosure Considerations
A desiccated, non-condensing environment is required. The 14394 Mounting Kit includes hardware for securing the RavenXTG to an enclosure backplate (see Ordering Info).
Documents
Downloads
Device Configuration Utility v.2.31 (47.0 MB) 18-12-2024
A software utility used to download operating systems and set up Campbell Scientific hardware. Also will update PakBus Graph and the Network Planner if they have been installed previously by another Campbell Scientific software package.
Supported Operating Systems:
Windows 11 or 10 (Both 32 and 64 bit)
Casos de estudio
In 1922, when the intact tomb of Tutankhamen was discovered in Egypt's Valley of the......read more