RETIRED ›
This product is no longer available and has been replaced by: BPALK. Some accessories, replacement parts, or services may still be available.

Imagen no disponible

Services Available
Repair No
Calibration No
Free Support No

Overview

The PS12ALK typically provided a 12 V, 7.5 Ahr alkaline power supply for the CR500, CR510, CR10(X), and their peripherals.

Read More

Detailed Description

The PS12ALK typically provided a 12 V, 7.5 Ahr alkaline power supply for the CR500, CR510, CR10(X), and their peripherals. It was also used as a separate auxiliary 12 V power supply for remotely located sensor(s) or peripheral(s). However, to avoid errors in analog measurements and ground loops, the PS12ALK needed to share a common ground.

The PS12ALK replacement, the BPALK, is the less-versatile, but also less expensive. In contrast to the BPALK, the PS12ALK contained reverse input-protected charging circuitry for charging an external user-supplied battery from a solar panel. The internal alkaline cells in the PS12ALK could not be recharged.

Specifications

  • Operating Temperature Range:  -25° to +50°C
  • Amp Hour Rating: 7.5 Ahr
  • Output Voltage: 12 Vdc

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Additional Compatibility Information

Enclosure Considerations

A desiccated, non-condensing environment is required. The PS12ALK includes built-in keyhole flanges for mounting to the backplate of a Campbell Scientific enclosure.