CS210 Enclosure Humidity Sensor
Remote Monitor
Ensure ideal conditions in enclosures
weather aplicaciones soportadas water aplicaciones soportadas energy aplicaciones soportadas gas flux and turbulence aplicaciones soportadas infrastructure aplicaciones soportadas soil aplicaciones soportadas

Overview

El CS210 es nuestro sensor para monitarear la j¡humedad interna de la caja hermetica donde se instalan los equipos electronicos como el datalogger y/o los sistemas de comunicacion. Este sensor le ayudara a evitar daños por corrosion producida por la humedad si la silica desecante no se cambia a tiempo, a si mismo puede maximizar el uso de la misma. Todos nuestras instalciones incluyen un sensor de este tipo, le recomendamos incluirlo en su lista de equipo si es usted quien instalara sus propios sensores.  Le recordamos que cuando la humedad interna de la caja alcanza el 40%, es necesario cambiar la silica. (en algunos casos de sitios con humedad alta es necesario cambiar y agregar mas sobres)

Read More

Benefits and Features

  • Allows enclosure RH to be monitored remotely
  • Used to schedule desiccant replacement

Images

Detailed Description

When CS210's measurements indicates that the RH level inside the enclosure is 40% or more, the desiccant should be replaced with another packet. 

By having the datalogger measure the sensor, the measured values can be incorporated into the transmitted data stream of remotely located dataloggers. The probe has an 11-in. (28 cm) cable length, which should be adequate to place the probe near the enclosure conduits.

Specifications

Sensor Elan HM2000 series precision bulk-polymer
Relative Humidity Measurement Range 0 to 100% (non-condensing)
RH Output Signal Range 0 to 1.0 Vdc
Accuracy ±3% RH (10 to 90% RH) (at 25°C)
Typical Long-Term Stability Better than 3% RH per year
Response Time 10 seconds for a 30% to 90% RH step change (at 25°C, 90% response)
Current Consumption < 0.5 mA
Supply Voltage 5 ± 0.25 Vdc
Settling Time 10 s
Operating Temperature Range 0° to 50°C
Cable Length 27.9 cm (11 in.)
Sensor Head Dimensions 2.5 x 1.3 x 0.8 cm (1.0 x 0.5 x 0.3 in.)
Weight 9 g (0.3 oz)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired)
CR206X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR295X (retired)
CR300
CR3000 (retired)
CR310
CR350
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)