This product is no longer available and has been replaced by: CC5MPX. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
La camara digital CC640 fabricada por Campbell Scientific de Canada tarabaja en ambiente hostiles, remotos donde las camaras normales no pueden trabajar, incluso en ambientes muy frio de hasta -40ºC!. Las imagenes son almacenadas en formato JPG.
La CC640 se puede usar sola (ver el manual para indicaciones de alimentacion electrica en este tipod e instalacion) o conectadaa nuestros dataloggers. Las fotos pueden ser almacenadas en una memoria CompactFlash o en la memoria del datalogger.
Read MoreBenefits and Features
- Stores images in standard .jpg format
- Onboard slot for CompactFlash card
- Can be controlled by data logger or by internal timer
Images
Detailed Description
The CC640 is a digital camera for use in harsh environments. Where typical cameras cannot withstand cold temperatures, our CC640 digital camera operates at temperatures as low as -40°C!
The CC640 can be used by itself as a stand-alone camera or can be connected to one our data loggers. The data logger can trigger an image acquisition by applying a 5- to 12-volt signal. When used independently, the camera's precision real-time clock can be used to trigger an image capture.
Images can be stored on a CompactFlash card or in the data logger's memory. The images are stored in a .jpg format.
Specifications
| Lens Description | F1.4 3.5 to 8 mm Varifocal Lens with Electronic Iris |
| Image Type | JPEG |
| Resolution |
|
| Power | 9 to 15 Vdc |
| Communication Ports | RS-232, RS-485 (labeled external I/O), CS I/O |
| Maximum Baud Rate |
|
| CS I/O CSDC Addresses | 7 or 8 |
| Video Output | NTSC, PAL |
| Logic Low-Level External Input Signal | 0 to 0.7 Vdc (-12 Vdc absolute minimum) |
| Logic High-Level External Input Signal | 4 to 15 Vdc (15 Vdc absolute maximum) |
| Clock Accuracy |
|
| Time to Take Image | ~10 s |
| Operating Temperature | -40° to +70°C |
| Dimensions | 21.5 x 6.5 x 11.0 cm (8.5 x 2.6 x 4.3 in.) |
| Weight | 500 g (1.1 lb) |
Current Drain |
|
| Operating | 250 mA (maximum) |
| Quiescent | 250 μA (typical) |
Memory Card |
|
| Type | CompactFlash |
| File System | FAT16 |
| Storage | 2 GB or less |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | The CR10X must be the -2M version and must use the PakBus operating system. | |
| CR200X (retired) | ||
| CR206X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | The CR23X must be the -2M version and must use the PakBus operating system. | |
| CR295X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | The CR510 must be the -2M version and must use the PakBus operating system. | |
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |
Additional Compatibility Information
Enclosure/Mounting
The camera must be installed in an environmentally sealed enclosure that offers protection from moisture or high humidity. It is also recommended that desiccant be installed in the camera enclosure to absorb excess humidity. Failure to install or replace the desiccant as required may cause malfunctions or damage the camera.
The 18543 CC640 Camera Enclosure completely encloses the camera and has a window through which images are acquired. The 26140 Heater Kit is offered to prevent the enclosure’s window from frosting over. The enclosure attaches to a CM202, CM204, or CM206 crossarm via the 18549 Mounting Kit.
Software
LoggerNet version 3.1.3 or higher is required.
Data Logger Considerations
The CC640 is compatible with any PakBus data logger that has 2 Mbytes or greater of on-board memory. The data logger must have a current Operating System.
Documents
Product Brochures
Manuals
Downloads
CC640 OS v.1.52 (58.5 KB) 26-11-2009
Current CC640 firmware.
Note:Device Configuration Utility 1.15 or newer is required for compatibility.
Frequently Asked Questions
Number of FAQs related to CC640: 5
Expand AllCollapse All
-
-
The standard CR10X logger will store one image. The PakBus OS is a requirement. Loggernet version 2 will work with a CR10X PakBus logger. LNCMD.EXE does not allow viewing through the logger. It is the utility used to transfer the image from a logger to the PC.
-
Yes. However, this is not a fast system, and using telemetry can make the transfer even slower.
-
No. It takes a snapshot, stores the image in a data logger as a file (if one is present), and transfers the file to a PC for viewing.
-
Real-time images cannot be viewed. This is a snapshot camera. Regarding the serial terminal being used, if the data logger is a PakBus CR510 or CR10X, then the interface is not RS-232; the interface is CS I/O, which is a 5 V system. This interface is also addressable, meaning that more than one device can use the terminal at the same time. If a CR1000 or CR3000 is used, both 9-pin connectors and all four COM terminals can be used to acquire images.
Casos de estudio
All of our years of effort have paid off. Wehave collected a world-class data set......read more
One of the primary goals of the Federal Aviation Administration (FAA) is to reduce airplane......read more