Overview
The 38898 consists of a Morningstar 15 A charge regulator that has been re-configured by Campbell Scientific and includes the mounting hardware to mount it to a 2.54 cm (1 in.) grid back panel. This charge controller is well suited for large power supplies, which includes an AGM battery (BP84 84 Ah 12 V Sealed Rechargeable Battery) and a large solar panel (SP370-L 370 W Solar Panel). As an additional benefit, Campbell Scientific provides full support of the SunSaver MPPT.
Read MoreBenefits and Features
- Preconfigured to work with AGM battery types and to prioritize data collection over long-term battery health
- 12 V or 24 V battery charging
- 60 Vdc maximum input compared with the 50 Vdc on the CH201 and 40 Vdc on the CH150
- Selectable battery type: gel, sealed, AGM, flooded
- Programmable low voltage disconnect (LVD)
- Auto-equalization feature for AGM battery types
- Terminals for remote temperature sensor (RTS) to compensate charging based on battery temperature; use pn 38899
- Built-in temperature sensor for use when no RTS is provided
- Battery status LEDs to provide battery state of charge and indicate fault condition
- RS-232 communication with pn 34540
Images
Detailed Description
The 38898 uses maximum power point tracking. While the 38898 is capable of RS-232, Modbus, and USB communications, only RS-232 communication is supported through the hardware. Note: When reading parameters off the 38898 using a data logger, you must use the CPI/RS-232 port. This functionality does not work when using the control ports.
The 38898 offers the ability to select the battery type: gel, sealed, AGM, or flooded. To set the battery type, use a jumper and switch #1.
The 38898 offers programmable low voltage disconnect (LVD). From the manufacturer, the 38898 comes with an 11 V LVD when switch #2 is on and an 11.5 V LVD when switch #2 is off. At Campbell Scientific, we prioritize data over battery health and reconfigure the LVD to 8.5 V and the LVR to 10.0 V. Caution: Draining a battery below 11.5 V will shorten the life of the battery.
Specifications
| Operational Temperature | -40° to +60°C |
| Storage Temperature | -55° to +100°C |
| Battery Voltage Range | 7 to 36 V (power out) |
| Maximum Input Voltage | 60 V |
| Quiescent Current | 35 mA |
| Certifications |
|
| Dimensions |
|
| Weight | 589.67 g (1.3 lb) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| CR1000 (retired) | The CR1000 is not compatible in terms of communication. | |
| CR1000X | The CR1000X is compatible in terms of communication. | |
| CR300 | The CR300 is compatible in terms of communication. | |
| CR310 | The CR310 is compatible in terms of communication. | |
| CR350 | The CR350 is compatible in terms of communication. | |
| CR6 | The CR6 is compatible in terms of communication. |
Power Supplies
| Product | Compatible | Note |
|---|---|---|
| BP12 | ||
| BP24 | ||
| BP7 | ||
| BP84 | ||
| SP10 | ||
| SP10R-L (retired) | ||
| SP20 | ||
| SP20R-L (retired) | ||
| SP370-L | ||
| SP50-L | ||
| SP5-L |
Additional Compatibility Information
The 38898 can be used to power any 12 V device. Refer to the Compatibility information on the web page regarding communication compatibility with data loggers.