Solar Panels / SP10
SP10 10 W Solar Panel

Overview

The SP10 is a 10-W photovoltaic power sources capable of recharging batteries. Its 6.1 m (20 ft) cable has stripped and tinned leads that connect to the PS150, PS200, CH150, CH200, or battery base of the CRVW3, CR3000, CR5000, CR7, CR9000X, or CR6. The SP10 has a sufficient charging source for many of our system configurations in tropical to temperate latitudes. It allows unattended operation of systems in remote locations, far from AC electrical sources.

Read More

Benefits and Features

  • Supplies electrical power in locations where ac power is unreliable, expensive, or not available
  • Recharges the sealed rechargeable battery of a PS150, PS200, BP12 (requires CH150 or CH200), BP24 (requires CH150 or CH200), CRVW3, CR3000, or CR5000

Images

Detailed Description

The SP10 includes mounting hardware consisting of one pn 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 to 50.8 cm (1 to 2 in.) OD].

A 788 connector must be soldered onto the solar panel leads to use the SP10 with a 21XL rechargeable base.

Specifications

-NOTE- Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.
Maximum Peak Power 10 W
Current at Peak 0.59 A
Maximum Allowable Wind Gust Speed
  • Note: The wind ratings are for solar panels with the indicated mounts and do not account for strength of tower or tripod.
  • 31 m s-1 (70 mph) Standard mount
  • 58 m s-1 (130 mph) Extended mount
Voltage at Peak 16.8 V
Cable Description 20 AWG, 1-twisted pair
On-board Regulator Included No
Cable Diameter 6.35 mm (0.25 in.)
Dimensions 41.9 x 26.9 x 2.3 cm (16.5 x 10.6 x 0.9 in.)
Weight 2.1 kg (4.6 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
CR300 The SP10 is compatible with the built-in regulator.
CR3000 (retired) (The SP10 is compatible with the built-in regulator.)
CR310 (The SP10 is compatible with the built-in regulator.)
CR350 The SP10 is compatible with the built-in regulator.
CR6 (The SP10 is compatible with the built-in regulator.)

Power Supplies

Product Compatible Note
BP12
BP24
BP84
CH200
CH201
PS200 (The SP10 is compatible with the built-in regulator.)

Additional Compatibility Information

Regulators

The SP10 is compatible with the CH150; the CH200; the CH201; or the regulator built into the PS150, PS200, CR6, CR3000, CR300, CR310, or CRVW3.

Batteries

The SP10 is compatible with EnerSys Genesis NP series (such as PS200, BP12, BP24), EnerSys Cyclone Series, or Concorde Sun Xtender Series (such as BP84) batteries.

Videos & Tutorials

Casos de estudio

Egypt: Preserving King Tut's Tomb
In 1922, when the intact tomb of Tutankhamen was discovered in Egypt's Valley of the......read more

Articles and Press Releases