Overview
The 18098 is used to mount a user-supplied Eppley solar sensor or a 18285 omnidirectional antenna to a tripod or tower. This mounting stand is shipped with the 18285 antenna, and is available as a replacement part.Images
Specifications
| Why/When to Use | Used to mount an Eppley solar sensor. |
| Material | Anodized aluminum |
| Hardware Material | Stainless steel |
| Material Thickness | 3.175 mm (0.125 in.) |
| Dimensions | 20.32 x 12.7 x 8.89 cm (8.0 x 5.0 x 3.5 in.) |
| Weight | 317.5 g (0.7 lb) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Mounting Equipment
| Product | Compatible | Note |
|---|---|---|
| CM10 (retired) | ||
| CM106 (retired) | ||
| CM110 | ||
| CM115 | ||
| CM120 | ||
| CM202 | ||
| CM204 | ||
| CM206 | ||
| CM6 (retired) | ||
| UT10 | ||
| UT20 | ||
| UT30 |
Additional Compatibility Information
Crossarms
Place the U-bolt on the bracket's bottom holes for attachment to a crossarm.
Mast or Vertical Pole
Place the U-bolt on the bracket's side holes for attachment to a tripod or tower mast or to a user-supplied vertical pole.
User-Supplied Vertical Pole
The 18098 can mount to a pipe with a 1 to 2.1 inch outer diameter.
Listed Under
Replacement Part for the following products: