Make it yours.

Send a program.

View the steps. 



Collect and view data.

View the steps.





View CR300 Page

CR300 Support Resources

  1. CR300 and CR310 Getting Started Tutorial
  2. Datalogger Programming
  3. CR300-Series USB Communications
  4. CR300 Series Wi-Fi QuickStart
  5. RF Communication QuickStart
  6. CR300 Datalogger QuickStart (Part 1) (1:47)
  7. CR300 Datalogger QuickStart (Part 2) (5:19)
  8. CR300 Datalogger QuickStart (Part 3) (5:36)
  9. CR300 Datalogger QuickStart (Part 4) (3:31)
  10. Fundamentals of CRBasic Programming Part 1: Variables (13:30)
  11. Fundamentals of CRBasic Programming Part 2: Tables (8:53)
  12. Fundamentals of CRBasic Programming Part 3: Writing a Complete Program (14:51)
  13. Fundamentals of CRBasic Programming Part 4: Programming for Control with Operators and Logical Expressions. (9:05)
  14. Fundamentals of CRBasic Programming Part 5: Conditional Tables (10:51)
  15. Fundamentals of CRBasic Programming Part 6: Loops (9:02)
  16. Fundamentals of CRBasic Programming Part 7:Determine If External Memory is Required/Intro to MicroSD (9:19)
  17. Fundamentals of CRBasic Programming Part 8: Deploy, Monitor, and Swap MicroSD Cards in the Field (7:41)
  18. Fundamentals of CRBasic Programming Part 9: Retrieving Data from a MicroSD Card (5:51)
  19. CRBasic in the Real World Part 1: Adding a Water Level Measurement (8:28)
  20. CRBasic in the Real World Part 2: Triggering Real-Time Measurements During a Site Visit (10:41)
  21. CRBasic in the Real World Part 3: Subroutines (6:31)
  22. CRBasic in the Real World Part 4: Offsets (7:24)
  23. CRBasic in the Real World Part 5: Changing the Sensor Used in a Program and Program Versioning (5:42)
  24. Sending an OS to a Local Datalogger (Part 1) (5:28)
  25. Sending an OS to a Remote Datalogger (Part 2) (5:10)
  26. IP Networking and Data Loggers Part 1 (8:34)
  27. IP Networking and Data Loggers Part 2 (9:51)
  28. Ethernet over USB (2:11)
  29. Built-in Web Interface (2:59)
  30. Power Budgeting (4:07)
  31. Certificates of Calibration (1:05)
  32. Toolbox for Installation and Maintenance (2:21)
  33. Using a Multiplexer (8:27)
  34. Troubleshooting Resistance-Based Sensors (18:23)
  35. Troubleshooting Voltage Output Sensors (7:42)
  36. SDI-12 Sensors | Transparent Mode (7:13)
  37. SDI-12 Sensors | Watch or Sniffer Mode (3:25)
  38. Pipeline and Sequential Modes (10:04)
  39. Double-Precision Calculations (5:50)
  40. LoggerLink Software | An Introduction (12:11)
  41. LoggerNet Software | Network Planner (4:04)
  42. LoggerNet Software | Changing Variables (2:33)
  43. Understanding the Importance of Grounding (5:41)
  44. Using RTMC (2023) (10:41)
  45. Using RTMC Pro (5:44)
  46. Using RTMC Pro to Create a Report and Hotspot (6:45)
  47. Basic Troubleshooting 1: Measuring Data Logger Output Voltage With a Multimeter (3:54)
  48. Basic Troubleshooting 2: Checking Continuity (2:15)
  49. Basic Troubleshooting 3: Measuring Current Drain (4:12)
  50. Troubleshooting Communications Issues with LogTool (6:40)
  51. Introduction to the CR1000KD (2:44)
  52. Troubleshooting with the CR1000KD (7:12)
  53. CRBasic Functions (6:23)
  54. Backing Up and Restoring Data Logger Settings Files Using Device Configuration (4:07)
  55. Backing Up and Restoring Data Logger Settings Files Using Device Configuration (4:07)
  56. Creating Custom Menus in CRBasic for a Data Logger Display (8:28)
  57. Wiring Diagrams for Data Logger Programs Part 1: Using Short Cut for Windows (5:28)
  58. Creating a Short Cut Wiring Diagram for Sensor Not in Short Cut (5:50)
  59. Analyzing a CRBasic Program to Deduce Sensor Wiring (7:13)
  60. Documenting Data Logger Wiring Using an Excel Template (5:41)