This product is no longer available and has been replaced by: SP20. Some accessories, replacement parts, or services may still be available.
Imagen no disponible
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The SP20-PW is a 20-W photovoltaic power source capable of recharging batteries. Its 15 ft cable terminates in a connector that attaches to a Campbell Scientific prewired enclosure. The connector in the enclosure then leads to a power supply or battery base to recharge the battery, allowing unattended operation of systems in remote locations, far from AC electrical sources.
This solar panel is often used for system configurations that have higher-than-average power requirements, or in higher elevation and latitude locations.
Read MoreBenefits and Features
- Supplies electrical power in locations where ac power is unreliable, expensive, or not available
- Quick, secure connection to Campbell prewired enclosures for more efficient setup
- Recharges the sealed rechargeable battery of a PS150, PS200, BP12 (requires CH150 or CH200), BP24 (requires CH150 or CH200), CRVW3, CR3000, or CR5000
Detailed Description
The SP20-PW includes mounting hardware consisting of the pn 17492 U-bolt and Matching Nuts. The pn 17492 U-bolt provides a 2.125" (5.398 cm) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75" to 1.5" IPS pipe (1" to 2" OD).
Specifications
- Maximum Peak Power: 20 W
- Guaranteed Minimum Peak Power: 18 W
- Current at Peak: 1.19 A
- Voltage at Peak: 16.8 V
- Weight: 4.4 kg (9.6 lb)
- Cable Length: 4.572 m (15 ft)
- Dimensions:
50.0 x 42.2 x 5.1 cm
(19.7" x 16.6" x 2")
Note:Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.
Compatibility
Battery
The SP20-PW is intended to recharge 12 V Gel Cell or AGM lead acid batteries such as the batteries used with the PS150, PS200, BP12, BP24, CR3000, CR5000, and CR6. It is not intended for user-supplied 12 V flooded batteries such as deep cycle marine or RV batteries.