This product is no longer available and has been replaced by: SP10R-L. Some accessories, replacement parts, or services may still be available.
Imagen no disponible
| Services Available | |
|---|---|
| Repair | Yes |
| Free Support | Yes |
Overview
The SP10R-PW is a 10 W photovoltaic power source capable of recharging batteries. Its 6.1 m (20 ft) cable terminates in a connector that attaches to a Campbell Scientific prewired enclosure.
The SP10R-PW is similar to the SP10-PW except it contains an on-board voltage regulator, allowing the SP10R-PW to supply power to a user-supplied battery mounted inside a Campbell Scientific prewired enclosure (PWENC).
Read MoreBenefits and Features
- Supplies electrical power in locations where ac power is unreliable, expensive, or not available
- On-board voltage regulator allows direct connection to a user-supplied external battery
- Quick, secure connection to Campbell prewired enclosures for more efficient setup
Detailed Description
The SP10-PW includes mounting hardware consisting of two part no. 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 in. to 50.8 cm (1 in. to 2 in.) OD].
Please note that the SP20R-PW has a 2-mA continuous current drain (meaning that it consumes a small amount of power from the connected battery at night).
Specifications
- Current at Peak: 0.59 A
- Voltage at Peak: 16.8 V
- Maximum Peak Power: 10 W
- Current Drain: 2 mA continuous
- Weight: 3.0 kg (6.6 lb)
- Cable Length: 6.1 m (20 ft)
- Dimensions:
41.9 x 26.9 x 2.3 cm
(16.5 x 10.6 x 0.9 in.)
Note: Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases.
Compatibility
The SP10R-PW is compatible with user-supplied, 12 V flooded batteries such as deep cycle marine or RV batteries. It is not compatible with 12 V gel cell or AGM lead acid batteries such as the batteries contained in the BP12 or BP24 battery packs.