Archivos para bajar por nombre

Archivos para bajar por categoría

Want instant access to downloads? Log In or Register

Program Examples

AM16/32B Example Programs 1 (8 KB) 11-12-2020


CR6, CR1000X, and CR300 programs demonstrating taking multiple measurements using an AM16/32B relay multiplexer. Examples cover single-ended, differential,... learn more

BaroVue10 Program Example (1 KB) 28-03-2023


Description: Includes an SDI-12 example and a RS-232-serial program example. The programs are written for a CR1000X, but... learn more

Blackglobe Example Program 1 (2 KB) 14-07-2022


This program was written for a CR1000X data logger. Program code of other data loggers will be similar.... learn more

CCFC Program Examples (15 KB) 21-07-2021


Description: The example programs provide the following functions:  (1) add GPS coordinates using the CCFCGPSLatitude and CCFCGPSLongitude instructions;... learn more

CDM-VW300 Example Programs (45.4 KB) 23-05-2013


CRBasic program examples for use with the CDM-VW300 and CDM-VW305. learn more

CELL2XX example programs (6 KB) 22-06-2021


Three example programs as described in the CELL200-Series manual. The Power program shows how to control power to... learn more

CH201 Example Programs 2 (3 KB) 11-01-2022


Two CR1000X data logger programs that monitor the CH201. One example program uses RS-232, and the other example... learn more

ClimaVue 40 Program Examples 1 (4 KB) 26-11-2024


Two example programs are included that read the ClimaVue 40 data using a CR1000X data logger and the... learn more

ClimaVue 50 Example Program 1 (3 KB) 08-07-2021


An example CR1000X program that uses the R7! SDI-12 command to retrieve data. The program adjusts the barometric... learn more

COM310 Examples (5 KB) 22-04-2008


CR1000 CRBasic program examples showing COM310 data callback and voice support. learn more

CR1000X CNR4 Program Controlling the CNF4 Heater/Ventilator 1 (4 KB) 17-10-2019


CR1000X program measures the CNR4 and controls the CNF4 heater/ventilator based on environmental conditions, and monitors the CNF4... learn more

CR1000X CNR4 Program using Thermistor 1 (2 KB) 17-10-2019


CR1000X program that uses differential terminals to measure the four radiation outputs and one excitation terminal and one... learn more

CR1000X CS120A example programs 1 (2 KB) 18-03-2020


CR1000X programs that use the MSSET and MSGET commands. learn more

CR1000X CS125 example programs 1 (10 KB) 18-03-2020


CR1000X programs that read continuous data and polled data and use the SET, SETNC, and GET commands. The... learn more

CR1000X HFP01SC Example program 2 (3 kb) 18-02-2020


CR1000X program that measures the HFP01SC, performs the self-calibration, and checks for calibration validity. Refer to the manual... learn more

CR3000 CNR4 Program using Pt-100 1 (2 KB) 17-10-2019


CR3000 program measures the Pt-100 sensor for the body temperature of the CNR4. This program requires four differential... learn more

CS110 Example programs 1 (3 kB) 05-05-2020


A CS110 weather station program and a CS110 transfer standard site calibration program. The weather station program measures... learn more

CS140 Program Examples (5 KB) 15-03-2022


Four example CR1000X programs are included that use the POLL, SET, SETNC, and GET commands for the CS140.... learn more

CS241DM Program Example (2 KB) 18-08-2021


CR6 example program that retrieves information from the input register of four CS241DM sensors, then averages the temperature... learn more

CS241 Program Examples (2 kB) 15-06-2021


Includes two CR1000X example programs. One program measures the CS241 using the two-wire configuration and the other program... learn more

CS250DM Example Program 1 (1 KB) 07-12-2020


The example CR6 program measures four CS250DM sensors, averages the four temperature measurements, and calculates the standard deviation... learn more

CS25 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS26 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that control the relay, measure the short circuit current for the reference and... learn more

CS27 example programs 1 (5 kB) 29-01-2020


CR6, CR1000X, and CR300 programs that measure the short circuit current for the reference and test modules and... learn more

CS325DM Program Examples 2 (3 KB) 11-01-2022


Two CR1000X data logger programs that read the CS325DM measurements. An example program is included for each output... learn more

CS547a Program Examples for CR1000X and CR1000 Data Loggers 1 (7 KB) 24-02-2022


Four programs are included: two CR1000X programs and two CR1000 programs. The first CR1000X and CR1000 programs measure... learn more

CSAT3B Example Programs 1 (4 kB) 20-10-2020


Three example programs.  Simple SDM Program: SDM communications are used to collect data from a single CSAT3B. Simple CPI Program:... learn more

CSAT3BH CR1000X Programs 2.03 (9 KB) 20-11-2020


CR1000X datalogger programs for the CSAT3BH with SDM and CPI communications protocols.  Warning: This program is not intended for... learn more

CSAT3BH CR6 Programs 2.03 (9 KB) 20-11-2020


CR6 datalogger programs for the CSAT3BH with SDM and CPI communications protocols.  Warning: This program is not intended for... learn more

CSAT3 Datalogger Program Examples (13.4 KB) 03-03-2007


Example CR1000, CR3000, and CR23 datalogger programs to measure the CSAT3 three dimensional ultrasonic anemometer. The programs include... learn more

CSAT3H Heater Controller 14.2 (46 KB) 02-02-2021


The CSAT3H Heater Controller ships with this encrypted program. This program is for the unlikely event that the... learn more

CSAT3 SDM Search Program Examples (32 KB) 03-03-2007


Example datalogger programs for finding the optimal SDM baud rate. These programs are used to determine the appropriate... learn more

ET107 Default Programs (4 KB) 29-03-2021


One default program is for an ET107 with the 034B wind sensor and another default program is for... learn more

Granite 10 CAN Bus Example Program 1 (3 KB) 16-10-2019


A Granite 10 example program using CAN bus to query an ECU for the legislated PID values once... learn more

LLAC4 Program Example (2 KB) 21-05-2024


Description: Includes two programs, one for a CR1000X and one for a CR350. Both programs measure three different wind... learn more

MetSens200 Example Programs 1 (4 KB) 25-09-2019


Three CR1000X data logger programs that read the MetSens200 measurements and sensor status. An example program is included... learn more

MetSens300 Example Programs 1 (4 KB) 25-09-2019


Three CR1000X data logger programs that read the MetSens300 measurements and sensor status. An example program is included... learn more

MetSens500 Example Programs 1 (5 KB) 25-09-2019


Three CR1000X data logger programs that read the MetSENS500 measurements and sensor status. An example program is included... learn more

MetSens550 Example Programs 1 (5 KB) 25-09-2019


Three CR1000X data logger programs that read the MetSens550 measurements and sensor status. An example program is included... learn more

MetSens600 Example Programs 1 (5 KB) 25-09-2019


Three CR1000X data logger programs that read the MetSens600 measurements and sensor status. An example program is included... learn more

PS200 Example Programs 1.1 (36.4 KB) 08-12-2014


CR1000 programming examples for use with the PS200.  The examples show how to use both SDI-12 and RS-232... learn more

RainVue-Series Example Program 1 (2 KB) 21-10-2020


An example CR1000X program uses the M! SDI-12 command to measure the RainVue 10 or RainVue 20 and... learn more

RangeVue Program Examples (1 KB) 12-07-2024


Two programs use the C1! SDI-12 instruction to measure the RangeVue-series sensors. One program is for the CR350... learn more

RMY81000 Example Programs 1.0 (5 KB) 05-11-2010


Example CR1000 datalogger programs to measure a RMY81000 configured as a RMY81005 or RMY81005A. Along with the programs... learn more

SDM-CD16AC Program Examples 1 (3 KB) 11-04-2022


There are three example programs for the CDM-CD16AC. The first program demonstrates using two SDM-CD16AC modules to control... learn more

SDM-IO16A Example Program 1 (3 KB) 11-08-2020


CRBasic program demonstrating twelve functions of the SDM-IO16A using the SDMIO16() instruction. This program is not an example... learn more

SDMS40 Example Programs 1 (4 KB) 13-08-2020


Three example CR1000X programs. Two programs use SDI-12 and one program uses RS-232. All example programs read the... learn more

SkyVue Example Programs 1 (3 KB) 07-11-2019


CRBasic data logger programs for use with CS message 1. One example includes a cyclic redundancy check (CRC).Please... learn more

SMP10 Example Programs 1 (3 KB) 12-01-2021


Includes two CR1000X programs. One program measures the SMP10 sensor using Modbus over RS-485 and the other program... learn more

SoilVue 10 Example Program 1 (1 KB) 03-12-2020


This example CR6 program collects the volumetric water content, relative permittivity, soil temperature, and bulk electrical conductivity for... learn more

SR30 Example Program 1 (2 KB) 10-12-2020


The example CR1000X program measures the SR30 sensor. The program will store the values if the result code... learn more

SR50A example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50A output (SDI-12, RS-232, RS-485), and a CR1000... learn more

SR50AH heater control programs 1 (4 kB) 22-01-2020


CR6 and CR1000X programs that read the SR50AH SDI-12 output and control the SR50AH heater. A 107 sensor... learn more

SR50AT example programs 1 (11 kB) 22-01-2020


CR6 and CR1000X programs that directly read each type of SR50AT output (SDI-12, RS-232, RS-485), and a CR1000... learn more

SR50ATH heater control programs 1 (5 kB) 22-01-2020


CR6 and CR1000X programs that read the SR50ATH SDI-12 output and control the SR50ATH heater. The programs use... learn more

TX325 Program Example for CR3000, CR1000, or CR800 Data Logger 5 (3 KB) 30-10-2020


CR3000, CR1000, or CR800-series data logger program for the TX325 that sets up self-timed and random transmissions and... learn more

TX326 and TX325 Program Example for GRANITE, CR6, CR1000X, or CR300 Data Loggers 6 (5 KB) 18-10-2021


GRANITE-series, CR6, CR1000X, or CR300-series data logger program for the TX326 and TX325 that sets up self-timed and... learn more

VDIV Program Example (1 KB) 29-07-2022


In this example program, a VDIV10:1 and the VoltDiff() instruction are used to measure an input voltage with a... learn more

VWire 305 program example 1 (2 KB) 16-01-2020


Program to read 20 Hz dynamic data from two VWire 305 analyzers measuring eight channels each. learn more

WindSonic1 Example Programs 1 (2 kB) 12-02-2020


Two example CR1000X programs that read the WindSonic1. One program reads the sensor directly, and the other program... learn more

TempVue 50 Program Example 1 (1 KB) 22-01-2024


This program uses the R0! SDI-12 instruction to retrieve the temperature measurement. The program is written for a CR1000X,... learn more

ClariVue 20 Program Examples 1 (3 KB) 20-11-2024


Three programs are included for the ClariVue 20 submersible turbidity sensor. One program uses the M1! SDI-12 command to make... learn more

Spectrum Program Examples 1 (5 KB) 19-01-2024


These example programs demonstrate how to use the CDM_VoltFilt(), CDM_BridgeFilt(), and CDM_FFTFilt() instructions on a Spectrum module. Additionally,... learn more

TempVue 20 Program Examples 1 (3KB) 19-10-2023


Three example programs are available for the TempVue 20. The SDI-12 program uses the R0! SDI-12 instruction to... learn more

ClariVue SDI-12 Program Example (1 KB) 11-08-2021


This example CR1000X program uses the M1! SDI-12 command to retrieve 100 burst measurements from a ClariVue 10... learn more

CS320 Program Example (3 KB) 11-08-2021


Two example programs that use the M4! command to return solar radiation (W/m^2), raw millivolt value (mV), sensor... learn more

SN500SS Program Example (1 KB) 11-08-2021


An example program that uses the M! SDI-12 command to measure the incoming short-wave (SW) radiation, outgoing SW... learn more

CS255 Program Examples (4 KB) 26-08-2021


Three example programs that measure the temperature sensors on the CS225 probe. The number of temperature sensors and... learn more

Custom Menu Example Program for Connections Video 1 (1 KB) 26-03-2024


This program demonstrates creating a custom menu for data logger displays and corresponds to the Campbell Connections video:... learn more

SR05 Example Programs 1 (2 KB) 10-09-2021


Two CR1000X data logger programs that read the SR05 sensor. An example program is included for each output... learn more

HMP155A Example Programs (4 KB) 15-10-2021


Description: Example CR1000X programs that measure either the analog voltage or RS-485 output of the HMP155A. The analog... learn more

SnowVue Program Example for GRANITE-Series, CR6, CR1000X Dataloggers 1 (10 KB) 03-11-2021


Two programs that read the SnowVue 10 sensor. One program performs temperature compensation to provide snow depth. The... learn more

Wintersense SDI-12 Program Example 1 (1 KB) 07-12-2022


An example program to read and store Wintersense SDI-12 data every five minutes. Program uses 0 for the... learn more

SurfaceVue 10 Program Example 1 (3 KB) 18-04-2024


SurfaceVue 10 standard programs with and without NTCIP. Set a constant to select RS-232 or RS-485 communications. Another... learn more

SDM-SIO2R Example Program 1 (3 KB) 05-10-2023


In this example program, a SDM-SIO2R will read a visibility measurement from the CS120A. If the SIO2R does... learn more

Data Logger Wiring Excel Template (1 KB) 26-03-2024


This is a data logger wiring diagram spreadsheet template that accompanies the Wiring Diagram Video. The spreadsheet includes... learn more

TS100SS Program Examples (2 KB) 09-09-2024


Two example programs that read a HygroVue5/HygroVue10 temperature and relative humidity sensor and measure the fan speed of... learn more