Attaches Directly to a PV Module without Drilling or Modification
Overview
The CM268 irradiance sensor mount is designed so you can make irradiance measurements as close to the modules/panels as possible. The mount can be clamped to the panel side, allowing for more representative and distributed measurements throughout the array.
Note: Although the CM268 is designed to fit many solar frames, Campbell Scientific recommends confirming that the frame of the intended solar panel is compatible with the mount.
Images
CM268 (solar panel not included)
Specifications
| Material | Anodized aluminum |
| Dimensions | 16.5 x 16.5 x 16.5 cm (6.5 x 6.5 x 6.5 in.) |
| Weight | 907.2 g (2 lb) |
Listed Under
Other Accessory for the following products:
- SR05-L - ISO 9060 Second Class Pyranometer with Analog and RS-485 Modbus Communications
- MS-80-L - Class A Pyranometer
- SR20-D2-L - Digital Class A Pyranometer
- SR30-L - Class A Pyranometer with RS-485 Modbus Communications with Integrated Heating and Ventilation
- MS-80SH-L - Class A Spectrally Flat and Fast-Response Pyranometer with Integrated Dome Heater