Videos & Tutorials
Built-in Web Interface
The CR6, CR1000X, and CR300-series dataloggers feature an embedded web interface allowing access to real-time and stored data. Additionally, you...
Ethernet over USB
After installing Microsoft’s RNDIS driver, you can connect to your CR6, CR1000X, CR350-series, or CR300-series dataloggers through a virtual Ethernet...
CR300 Series Wi-Fi QuickStart
Quickly set up Wi-Fi communications with a CR300-series datalogger. This tutorial will get you started with examples to either create...
EZSetup Ethernet Connection
Use the EZSetup wizard to set up IP communication between the computer and datalogger.
Datalogger Ethernet Configuration
Use the Device Configuration Utility to enter the datalogger static IP Address, Subnet Mask, and IP Gateway address. (A static...
RF Communication QuickStart
Quickly set up radio communications with a CR300-series datalogger. This tutorial will get you started with several example networks: Example...
CR310 Ethernet QuickStart
You've followed the QuickStart steps to get your CR310 datalogger communicating over USB and programmed to take measurements. Now set...
Connect | Manage Storage Devices with File Control
The File Control feature lets you manipulate files stored on the datalogger or external storage devices. Learn how to quickly...
Hughes 9502 Inmarsat BGAN Satellite IP Terminal
Take a look at using the HUGHES9502 to provide an Internet connection to a Campbell Scientific datalogger.
Cellular Modems | Troubleshooting
A troubleshooting guide to resolve some issues encountered with cellular modems. Topics covered include connection issues, error codes, hardware, signal...
Learn more about CampbellCloud.