Analog Input Peripherals / SDMX50
RETIRED ›
This product is not available for new orders.
This product is not available for new orders.
| Services Available | |
|---|---|
| Repair | Yes |
| Calibration | No |
| Free Support | Yes |
Overview
The SDMX50 is available in a very limited supply. The SDMX50 will be replaced by the SDM8X50.
The SDMX50 is one of three 50 ohm, coaxial, 8:1 multiplexers that can be used in a TDR100-based system. It consists of a surge-protected multiplexer circuit board mounted in a 10" x 12" x 5" environmental enclosure. The enclosure's backplate provides a strain-relief point for the coaxial cables. Cable ties and desiccant are included.
Images
Specifications
| Outside Dimensions | 40.4 x 29.2 x 17.5 cm (15.9 x 11.5 x 6.9 in.) with mounts |
| Inside Dimensions | 25.4 x 30.4 x 12.7 cm (10 x 12 x 5 in.) for enclosure |
| Weight | 4.4 kg (9.8 lb) |
Power Requirements |
|
| Input Power | 12 Vdc |
| Quiescent Current Drain | < 1 mA |
| Current Drain during Switching | ~ 90 mA (all multiplexers of the same level switch simultaneously for less than 1 s) |
Documents
Casos de estudio
California: Coastal Slope Monitoring
The North County Transit District (NCTD) of San Diego County, California, determined that three segments......read more
The North County Transit District (NCTD) of San Diego County, California, determined that three segments......read more
The Charles Sturt University (CSU) Rhizolysimeter is one of the largest root-growth research facilities in......read more
When the Ohio Department of Transportation (Ohio DOT) was preparing to widen Interstate 77, they......read more