Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
LoggerNet 4.6_Connect_Table Monitor->RecNum to-ya farm 0
LoggerNet 4.6_Connect_can syn between server time and station time cause CRX1000 malfuction? to-ya farm 0
strain gauge bobby 1
Modem to CR1000X via RS-232 argo 1
Re: Sending data to Rest API platform with CR1000X logger. setec@setec.cl 1
Cellular Diagnostic CR300 : Need Help : Nicolas 0
Serial instrument communications Viridius 0
ViewPro: Saving Imported CSV file as DAT file rmorris 1
CR310 GPRS and Ethernet ErnestoRivera 0
CR1000 two GSM re-connection problems smeck 0
Public variables with limited communication bandwidth MortenS 3
Radio Channel Mask - RF407 XMPG 0
NetworkTimeProtocol to synchronize datalogger Benjamin.vial 7
CR300 & ModBus RTU 485 Sensor Nicolas 3
CallTable position Makada 3
SMSSend Dams 4
Transmit data from CR1000 to computer using Xbee JimmyXu 3
Upgrade SO to CS655 w/o A200 smile 2
CR300-CELL215 network operator locked julien55 3
RS232 - RS485 Cable & Pinout Modbus Nicolas 1
CR1000X - Error Codes XMPG 2
Enable and disable 8 ports of the SDM-CD16 device, SDMCD16Mask instruction. Enripsc 2
Reading data from Modbus RTU device (Kamstrup Multical 603) with CR6 logger ipantev 0
CR1000X Datalogger - Reading from SD Card for FTP Streaming Shreeshant 4
Additional Pulse Counters BertSP 6
CR300 Webserver ryan42 2
Connecting to CR1000 logger bweeding 1
TMAS T61-EHS5 3G modem / Gateway rmorris 1
Change TIMESTAMP in data table outputs MAQS017 1
Cr10x losing connection embayweather 1