| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The CR7 is a precision instrument that is primarily used in multi-parameter research and industrial applications. Each CR7 system is individually configured to meet the specific measurement needs of the customer.
This control module is the base of the measurement system, then the input/output module, datalogger enclosure, and I/O cards are added. As measurement needs change from study to study, the CR7 can be adapted by modifying the I/O card configuration.
Read MoreBenefits and Features
- Collects and stores data and controls peripherals as the brain of your system
Images
Detailed Description
The CR700X control module is the main component in a CR7—a large modular datalogger. It is ordered with internal PROMs (firmware) and temperature testing. The CR700X contains the system's CPU, ROM, RAM, a serial interface for communication with data storage/retrieval peripherals and connection of up to four I/O Modules (typically one alongside the CR700X and three at some distance to the CR700X), and a keyboard/display. Refer to the Configuration tab for software compatibility.
The CR700X also accommodates:
- PROMs (detailed in the Ordering information)
- 3259 Battery (included; formerly known as the LA700)
- CR709 Memory Card (ordered separately)
A complete CR7 consists of:
- CR700X
- I/O Modules (either the CR720 or CR720XL)
- A mix of I/O Cards
Modular design consists of:
- Control module (CR7 700X)
- Input/output module (CR7 720 or CR7 720XL)
- Field or laboratory enclosure (ENC 7F, ENC 7XL, or ENC 7L)
Specifications
| -NOTE- | Note: Additional specifications are listed in the CR7 Specifications Sheet. |
| Scan Rate | 80 Hz |
| Processor | Hitachi 6303 |
| Memory | 24K ROM; 40K RAM. 709 Card provides an additional 512K RAM. |
| Communication Ports | 1 CS I/O |
| Baud Rate | 300, 1200, 9600, or 76,800 (user selected) |
| I/O Module Interface | Optically isolated current loops allow connection of up to 4 I/O Modules. I/O Modules can be separated from the Control Module by up to 1,000 feet. |
| Clock Accuracy | ±1 minute per month |
Compatibility
Compatible Software
- Short Cut
- PC200W
- PC400 (version 1.0 or higher)
- LoggerNet (version 2.0 or higher)
- PConnect (version 1.0 or higher)
- PConnectCE (version 1.0 or higher)
- VisualWeather (version 2.0 or higher)
Documents
Product Brochures
Frequently Asked Questions
Number of FAQs related to CR700X: 1
-
A practical maximum is to connect one multiplexer per every two control terminals on the data logger. Control terminals can be shared between multiplexers to increase the number of connected multiplexers. Sharing terminals, however, requires more complex wiring and programming. Users who would like to connect more than one multiplexer per every two control terminals are advised to contact a sales or support engineer at Campbell Scientific for assistance.
Casos de estudio
Campbell Scientific data-acquisition systems are used extensively for vehicle testing by the UK-based auto manufacturer,......read more
Instrumentation engineers from Daewoo Motors used a Campbell Scientific CR7 Measurement and Control System during......read more
The Aston Martin used a CR7 Measurement and Control System for environmental testing on its......read more